Hydroponic Newsletter

(Season) Specials

Request Catalogue

Hydroponic gardening

The HydroHut is ideal for growing plants indoors using hydroponics. It allows the horticulturist to control the environment in which plants grow.

The polyurethane has been processed to free it of toxins in all of our new stock. This covering fits snugly over the frame of the HydroHut, preventing awkward bulges due to the use of positive or negative pressure. This covering can be unzipped from all sides, allowing the horticulturist to attend to plants in a specific part of the HydroHut.

A number of fixtures and accessories allow the hydroponic horticulturist to use the HydroHut to suit specific requirements. The horticulturist can control the temperature and humidity inside the HydroHut using exhaust and intake blowers. The HydroHut design includes provisions for the addition of carbon dioxide (CO2) or fan controls regulated by third-party atmospheric controls. It also includes a mounting board to enable the mounting of atmospheric controls. HydroHuts use special carbon filters, made from the best quality pelletized charcoal.

HydroHut Original

The HydroHut Original now comes in a new bigger size. It is spacious enough to hold the Botanicare 4 x 4 tray, yet leaves enough room to contain additional accessories. The HydroHut Original comes with a double thermally plasticized floor and includes a ceiling grid, fan, and filter bracket. Three large air vents along the bottom and a duct opening in the roof allow easy circulation of air, which keeps the HydroHut Orignal cool inside

HydroHut Deluxe

The HydroHut Deluxe is made for the serious enthusiast. It measures 4 feet 2 inches wide, 8 feet 2 inches long, and 7 feet high. It has the room to accommodate most 4 x 8 trays and systems. It has two vents, one for intake and one for exhaust, which can be attached to centrifugal blowers. It is designed to hold up to two 1000-watt lights.

HydroHut Kindergarden

HydroHut Kindergarden measures 28 inches wide, 54.5 inches long, and 78 inches high. It has a split-level, for cloning and for vegging. It has four ductable air cooling vents. It can accommodate any 2 x 4 tray system.

IGS HydroHut Mini

This model is like the little brother of HydroHut Original. It measure 3 feet wide, 3 feet long, and 6.5 feet high. It can easily accommodate a 3 x 3 tray system.

HydroHut 2 x 4

The HydroHut 2 x 4 measures 28 inches wide, 54.5 inches long, and 78 inches tall. It has four ductable air cooling vents, a fan bracket, and a blower/filter bracket. It can hold any 2 x 4 tray.